Do You Know How To Maintain Cowhide Handbags?

- Jul 11, 2019-

It is best to use cowhide handbags frequently and wipe them with fine velvet cloth. If wet or mildew occurs in the rain, you can use a soft dry cloth to wipe off the water stains or mildew spots. Never rub with water or gasoline, because water can harden the dermis and gasoline can make the oil of the dermis volatilize and crack. If the handbag is wet without any waterproof treatment, please wipe it with a soft cloth immediately to prevent the surface from wrinkling due to stains or watermarks. If used on rainy days, special attention should be paid.


Do you know how to maintain cowhide handbags?

When the leather handbag wrinkles, it can be ironed with an iron. The temperature can be controlled between 60 and 70. When ironing, thin cotton cloth should be used as the interlining ironing cloth, and the irons should be moved continuously.


Cowhide handbag loses luster, it can be polished with leather polishing agent. Never wipe it with shoe polish. In fact, it is not difficult to polish the leather. As long as it is lightly rubbed once or twice with cloth dipping and polishing agent on the leather coat, it is generally enough to keep the leather soft and glossy and prolong its service life as long as it is polished every two or three years. Life.


If the leather handbag is torn or damaged, it should be repaired in time. If it is a small crack, you can apply some egg white at the crack, and the crack can be bonded.


When the leather handbag is not in use, it is better to hang it up; of course, it can be laid flat, but it should be put on the surface, so as not to be crushed and wrinkled by other things, affecting the beauty.

Before collecting, the leather handbag should be aired, not exposed to the sun. It can be hung in a shady and dry place for ventilation. In order to keep the colour and lustre of the leather handbag beautiful for a long time, a layer of milk or glycerin can be coated on the leather before collection, so that it can be stored for a long time without discoloration. Do not expose to sun, roast, wash, impact of sharp objects and contact with chemical solvents.


The sanding skin should not be wet, should be cleaned and nursed with raw rubber rubbing and special articles, and shoe polish should not be used.


Care should be taken to protect all metal fittings and zippers. The humid and salty environment can cause the oxidation of hardware.